Stand Off Bracket for 4G Antenna
Please note – the stand off bracket is only available to purchase at the same time as a Motorhome Wifi 4G Antenna and is not available separately.
The preferred fitting method of the 4G antenna is using its tried and tested ‘through the roof’ installation, using the none permeable 3M foam pad and 70mm threaded roof brace and cable entry design. It is recognised, however, that in some instances it is not possible to accommodate this fitting method – i.e. when the preference is to position the antenna centrally on the roof due to the design or location of other accessories.
This product is a high quality stainless steel powder coated stand off bracket to allow a surface mount installation, the footprint of which is not much larger than the antenna itself. The bracket has been specially designed to also accommodate the roof of a Fiat Ducato / Peugeot Boxer / Citroen Relay roof and give you the choice of either mounting the bracket on top of or between the ridges.
The antenna is attached to the stand off bracket using the 3M adhesive pad on the reverse and a 18mm nut and lock washer.
Purchasing the stand off bracket changes the default specification of your order for a Motorhome WiFi Antenna as follows;
1.) 1m default cable length is replaced with 5m cables
2.) The 70mm ‘through the roof’ threaded adapter is not supplied with the antenna as you will be mounting it onto the stand off bracket instead.
3.) Inclusion of some self-amalgamating tape to wrap the cable joins which will be external
4.) 4 x Stainless Steel screws
Please note that you need to source your own waterproof cable gland / roof entry point and suitable adhesive sealant
Antenna mounting area: 180mm x 180mm
Roof Mounting area: 180mm x 210mm
Height: 40mm (overall height to include the antenna: 102mm)